Wyse-technology TM 9000 Series User Manual download pdf (Page 48)

ELO Touchscreen

If the ELO Touchscreen option is installed on the Thin Client, you can use this application

to calibrate and customize the settings for a touchscreen monitor that is connected to the

Thin Client (or when ELO Touchscreen is integrated with Model 9650XE).

Note

Open the ELO Touchscreen application by double-clicking the ELO

Touchscreen icon in the control panel.

• The ELO Touchscreen icon is available in the control panel of both the User and the

Administrator desktops.

• The ELO Touchscreen option may require re-calibration and adjustment of the

screen settings, particularly for the 9650XE model, if the Thin Client is updated with

a new firmware image.

Wireless LAN Settings

If Wyse USB 802.11b hardware is installed on the Thin Client, you can use the Wireless

LAN Settings application to customize settings such as the wireless network ID. Open the

application by double-clicking the Wireless LAN Settings icon in Administrator control

panel.

Note

The Wireless LAN Settings icon is not available in the control panel of the

User desktop.

• Wireless LAN - The wireless icon in the control panel is for the specific Actiontec

USB wireless device ONLY.

• The configurations made in this icon are not applied to any other wireless cards

such as Cisco 350 and Orinoco Silver.

• The non-Actiontec adapters must be configured through the Control Panel\Network

Connections applet or through the device manager for more options.

Custom Fields

Double-click the Custom Fields icon in the Control Panel window and use the Custom

Fields dialog box (Figure 26) to enter configuration strings for use by the Rapport

Remote Administrative Software. The configuration strings can contain information about

the location, user, administrator, and other information.

Clicking Change in the dialog box transfers the custom fields information to the Windows

registry. The information is then available to the Rapport

Client Manager. To permanently

save the information, flush the Write Filter cache during the system session in which the

registry entries are made or changed.

For more information on the Rapport Remote Administrative Software, refer to “Remote

Administration and Firmware Upgrades” on page 54.

For details on using custom fields information, refer to the Rapport documentation.

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 73 74

No comments

Wyse-technology TM 9000 Series User Manual Page 48